Polypropylene pools
Manufacturing of pools of different shapes and sizes
Quality and affordable pool for You!
About pools:
Pools FORP are manufactured from food-grade polypropylene with characteristics are no less than those of reinforced concrete. Polypropylene pools allows to reduce amount of labor (avoid expenses on surface leveling, hydro insulation, lining), and shorten installation time.
Advantage of polypropylene pools:
- the bowl does not require additional treatment or lining;
- posses high mechanical and impact strength, resistance to numerous bends;
- high resistance to aggressive media;
- resistance to high (+150 °С) and low (-50 °С) temperatures;
- polypropylene surface interferes with appearance and growth of fungi, algae and other organisms;
- very low heat, vapor and gas permeability.
- manufacturing process allow to decrease time and cost of manufacturing by5 ‑ 2.5 times, in comparison to traditional processes;
- pool can be mounted inside the building.
Pool types:
Overflow pool – it a pool in which the water is on the same level as the edge of the bowl, and from surface flows into overflow channel around the pool's perimeter. The water then flows into accumulating compensation container. It is then pumped to filter, and the it is pumped back into pool trough bed nozzles. The accumulating container is equipped with level gauge and autonomous level control, to prevent the pomp from dry-running accidental overflow, and to sustain constant water level inside the pool by feeding it with fresh water. The water can be drained via drain on the bottom.
Skimmer pool – the most widespread type of modern swimming pool. It gained popularity owing to relatively simple construction, convenience and low cost in comparison to overflow pools. Its name come from the key element in water circulation – skimmer. The skimmer is designed for collecting upper layer of water along with floating objects. In such pools, the water later is at horizontal axis of the skimmer, i.e. there is a free space between water layer and the upper edge, which is usually about 10-20 cm. During circulation process, the water passes trough skimmer and via pump it is sent to the filtering system. After filtering, it is injected back into the pool. Such filtering type is optimal for small stationary pool and is widely used for private water bodies for cottages or summer houses. For even water circulation the skimmer is connected with the bottom drain. The water flow ration between skimmer and drain is about 2:1
Color: light blue, blue, white.
Pool shapes:
*and also any shapes and sizes to order
Polypropylene pool stairs:
| Straight in corner: |
 |
| Roman in corner: |
 |
| Roman: |
 |
| In lagoon: |
 |
| Roman in corner with bench: |
 |
*and also any shapes and sizes to order
Product's documents:
Answers to frequently asked questions:
1. What are advantages of polypropylene pools in comparison to others?
- Great insulation
- No requirements for additional treatment or lining
- Ease of maintenance, the bowl can be cleaned with any available chemical
- Stability at even harshest temperature regimes
- Ideal water tightness
- Polypropylene is non-porous, which prevents growth of fungi and other organism
- The pool can have virtually any shape and size
- Significant savings in comparison to other pool types
- Despite lower costs, the characteristics of polypropylene pools are no less than those of pools from other materials.
- Minimal manufacturing time.
2. Which type of pool is better ‑ skimmer or overflow?
Both types have their advantages and disadvantages. Skimmer pools are more used and have simpler construction, but have weaker water purification system, and water level of these pools is 15-20 cm below the edge (the pool isn't full). The overflow pool has more effective water mixing system. The water level is flush with the floor, which visually increases its size. This system have received widespread use, it is more effective, and more luxurious for privet pools and is necessary for public pools
3. What type of soil is recommended for pool installation?
For installation of out polypropylene pools the type of soil is of minor significance, however it is no recommended to install the pool on floating or fertile layers. In any case, our specialists will find a solution of proper installation.
4. How many days require for pool installation?
The manufacturing technology of polypropylene pools allows to obtain the finished product after 20-30 days
5. What to do with pool water during winter?
We strongly suggest no to drain pool for winter period because of following reasons:
- Compensation of soil pressure on pool's wall with water pressure.
- The material is less subjected to sharp temperature changes.
- If level of groundwater is high, then groundwater elevation during spring won't move the pool.
AFTER INSTALLATION OF OUR POOL YOU WILL REVIE ALL INSTRUCTIONS AND RECOMMENDATIONS necessary for taking care of your pools.
6. Can the ice damage the integrity or aesthetics of the pools?
No, because pool's construction and material toughness are not susceptible to such damage.
7. How often the water must be changed?
The water should be changes once per season, assuming correct operation of filtering system.
8. How deep the pool should be?
The depth of the pool is usually 1,5 – 1,8 m. , for kid's pool, usually, 0,7 – 1,2 m, and for water jumping ‑ 3 - 3,5 m. It is also necessary to consider that depth in some places of the pool. Thus it is only up to You to decide on depth of Your pool.
9. What is counter-flow and what it is for?
Counter-flow – is a device for creating of artificial water flow. This create directed flow which allows to swim while staying at the same place
10. Optimal size and shape of the pool?
This is a matter of taste, as such it is for You to decide. We can only make suggestions: avoid sharp angle, don't make it too deep etc.
